 |
| |
| AMF Panel ( Transfer Switch ) |
| |
| VNT make AMF panel is state of the art product specially designed for rural telecom sites where mains power outage and voltage fluctuations are very frequent. The AMF system can withstand a voltage ranging from 90 to 300V (LINE NEUTRAL) and is designed for more than 150,000 operations without degradation. |
| |
|
| The system is quite intelligent and comes with the feature of remote monitoring and controlling over wireless network. |
| |
|
| The system is quite intelligent and comes with the feature of remote monitoring and controlling over wireless network. |
| |
|
| The system is being vastly used in Indian telecom industry |
| |
|
| General Features of VNT AMF are: |
| • |
90-300V L-N (155-520V L-L) Wide Range Input |
| • |
Detailed Display system using 20 x 4 LCD and LEDs |
| • |
Inbuilt AMF / Transfer Switch for any make of DG set |
| • |
DG protection and exhaustive parameter settings options |
•
|
Galvanic isolation of 3KV on utility and DG power supply to work in harsh environments |
| • |
Encapsulated Class B Lightning Protection and Class C Surge Protection can be provided on request |
| • |
Fire and Door alarm and aviation lamp controller along with other infra alarms |
| • |
Serial port for data transfer options over TCP/IP, CANBUS, MODBUS, SNMP or as per customer reauirement. |
| • |
Inbuilt ACDB for outdoor site |
|
|
•
|
48V Telecom Battery and temperature monitoring |
| • |
Web Based Remote monitoring over GPRS/SMS |
| • |
Logging for Alarms and faults |
| • |
13 potential free contacts PLUS 5 high current contacts |
| • |
Optional Fuel management system |
| • |
Full Energy management for Mains, DG and Battery |
•
|
Comes in Stand alone powder coated mechanical cabinet. |
| |
|
|
|
|
| |
| General Description of VNT AMF PANEL |
| |
|
|
| |
Parameter |
Description |
| 1 |
Technology |
Advanced Micro-controller based system |
| 2 |
Mains input range |
90-300V Line to Neutral |
| 3 |
Load Current |
As per user's requirement |
| 4 |
No of DG sets tobe controlled |
Max 2 as per requirement be controlled |
| 5 |
Auxillary power |
6-14V OR 40-60V versions |
| 6 |
Parameter monitoring |
L-L/L-N voltage of mains and DG set, load.current, frequency, room temp, DG battery voltage, Telecom battery voltage, Power, Energy, DG and Mains RUN HOURS, Power factor, DGspeed etc |
| 7 |
Alarm Monitoring |
DG faults like START/STOP faults, Low Lubeoil,High water/cylinder temp, and logging V- Belt, DG over-speed, overload, phase reversal, room temp high, telecom battery low, Lack of fuel, mains fail,mains out of range etc |
| 8 |
Alarm dry contacts |
DG faults like START/STOP faults, Low Lube oil,
High water/cylinder temp, V- Belt, DG over-speed,
overload, phase reversal, room temp high,
telecom battery low, lack of fuel, mains fail, mainsout of range etc. |
| 9 |
Engine Protection |
Over speed, Overload, LLOP, LOFand alternate fault |
| 10 |
Isolation |
All inputs are isolated using upto couplers and power inputs are galvanically isolated using IT(insulation>3KV) |
| 11 |
Environmental |
As per QM 333 B2 standards |
| 12 |
Size |
As per customer requirement |
| 13 |
NMS |
Intelligent wireless web based remote management Systems |
| 14 |
Logging |
Local logging of faults and energy register |
| 15 |
Approvals |
BSNL, Idea Cellular, NSNv |
| 16 |
Engine compatibility |
Any reputed make |
|
| |
|
![]() |
|
|
|
|
| |
|
| |
| Copyright © Vrinda Nano Technologies
Pvt. Ltd. - All Rights Reserved. |
| Website Powered
by: |
|
|
| |
|
|
|
